NF-HW782000-PK | PINK COLOR

V-REFLEX LIFESTYLE
GLITTER TRANSFER FILM

IRON-ON / HOT PRESS / PVC MATERIAL

Materials - PVC

Certificate -  OEKO-TEX Standard 100

Color - Pink

Home Wash - Normal Cycles (Read Home Wash Instructions)

Dry-Cleaning - N/A

Flame Resistant - N/A

Industrial Wash - N/A

Color Fasten - Engineered to maintain color richness, brightness and resist cracking after home washings.

Waterproof -  Yes

Workable on wide range of substrate fabrics, polyester, cotton, lycra, etc. 

Lamination Temperature: 130-150 °C

Max. Wash Temperature: 40 °C

IMPORTANT: Test each application according to appropriate care instructions required for the finished product. Actual life of V-REFLEX^TM LifeStyle Glitter Heat Transfer Film/Vinyl depends on cleaning methods and wear conditions.

V-REFLEX^TM LifeStyle Glitter Heat Transfer Film/Vinyl is designed as an plotter (electronic) cuttable transfer film for use on fashion garments, T-shirt, consumer garments and other fashion accessories, …… It can be used to create fantastic graphic transfers that are easy to cut, weed, and can be laminated in one step.

V-REFLEX^TM LifeStyle Glitter Heat Transfer Film/Vinyl will help designers to expand their imagination, creativity and bring more visibility and safety to wearers. Fashion designers all around the world can not miss glitter heat transfer film for their collections.

NF: Non-Reflective Transfer Film

HW: Home Wash (Application, Dedication)

782000: Glitter Heat Transfer Film/Vinyl Series

BK: Black

RD: Red

GD: Gold

PK: Pink

SR: Silver

BL: Blue

V-CAN Offers a Wide Range of Color Selection. OEM Color is Acceptable. 

1. Using computer to design your patterns or texts in software

2. Cutting by plotter cutter or laser cutter machine

3. Weeding the useless parts

4. Transfer image on the T-shirt by heat press machine

5. Peeling (cold peeling)

6. Finished

Prepare For Heat Transfer (Heat Lamination)

VV-REFLEX^TM LifeStyle Glitter Heat Transfer Film/Vinyl are recommended to follow below info to set up the settings on laminating equipments

• Lamination Temperature: 130-150 ^oC
• Dwell Time (seconds): 10-20
• Line Pressure Firm: 30-40 psi

Above settings should be adjusted according to the pre-production testing results.

We also recommend below operations for mass production.

1. Work on a flat surface where uniform heat and pressure can be applied. Avoid applying film over seams and stitches.
2. Remove adhesive side line (if that product has one), exposing dry adhesive. Do not remove front side liner.
3. Place V-REFLEX^TM LifeStyle Glitter Heat Transfer Film/Vinyl on substrate with the adhesive side down and apply heat and pressure as described in the table below. Place a non-stick slip sheet between the platen and laminating surface to prevent any excess adhesive transfer contamination.
4. Allow application to cool to room temperature before removing the liner covering the reflective side (if that product has one). Place application on a flat surface and remove the liner by lifting one corner and pulling (about 45^o angle) in a continuous, smooth manner.

Additional Precautions for Heat Lamination

• 1- Do not exceed lamination temperature listed above as the PET liner may be melt and become difficult to remove. 
• 2- The lamination temperature, time and pressure listed above should be used as a guide. V-REFLEX^TM NON Reflective Material – Heat Transfer Vinyl should make the trial sample before mass production, after the trial blanching qualified mass production.
• 3- Highly recommend that wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
• 4- Fabrics with a waterproof coating on the surface cannot be printed transfered.
• 5- Wood products, ceramic products, glass products, plastic products cannot be printed transfered.

A colored clothing wash program without pre-wash should be used. Follow below recommendation could maintain the duability of retro-reflectivity to its maxium lifespan.

Recommendation:

1. Detergent: Brand powdered household detergents should be used.
   • Refer to the detergent manufacturer?s recommendations for dosage in areas of high water hardness and for various degrees of garment soiling.
2. Wash temperature range: 15°C to 60°C
   • Some items could be extended to be home-washed with a wider range of washing temperature than above.
   • Some items could be applicable to wash temperature ranging from 0°C to 90°C for those garment requiring harsher cleaning. Read the physical performance of each reflective tape for the details.
3. Max. Wash time at highest wash temperature: 12 minutes
4. Max. Program time: 50 minutes
5. Use of temperatures lower than 60°C will increase the lifetime of the reflective material.
6. Actual lifetime will be dependent upon the detergent system and list dosage level.
7. Load factor higher than 65% might lead to enhanced abrasion of the retro-reflective material

Drying Conditions

Tumble Dry: Tumble drying should be performed in a commercially available household dryer

Air Drying: Line drying is recommended where possible.

Hang-Up Drying: on line or rack

Tumble drying and tunnel/air drying are both recommended and applicable to this series of retro-reflective tape. Follow below recommendation will prolong the durability of product.

• • Using the medium dry setting.
  • Exhaust temperature should not exceed 90°C.
  • Do not overdry.

Care and Maintenance Instructions 

Washing/cleaning conditions harsher than those recommended below could significantly diminish the brilliance of the retro-reflective performance and shorten the product's lifetime. Therefore, the instructions must be strictly followed.

• No pre-soaking. 
• No application of high alkaline products (e.g. heavy duty products or stain removal products).
• No application of solvent detergents or micro-emulsions.
• No additional bleaches.
• Do not over-dry. The temperature of the material should not exceed 90°C at any time during drying.

Special Cleaning Instructions  

• For application on rainwear, a regular fluorocarbon treatment of the garment is recommended.
• Chemical splashes should be removed with a soft, dry cloth. Cleaning the garment the same day is recommended.
• Splashes of strong acids or alkalis should immediately be neutralized with plenty of water.
• Contamination with toxic or poisonous substances or biocontamination will require the application of a specific decontamination process.
• Application of high alkaline products, high pH-products, bleaches etc. is not recommended.

Don't Use Additional Bleach

• No chlorine bleach.
• No bleaches on oxygenic basis (e.g. sodium perborate bleaches).
• Do not store a wash batch even in a low concentration of bleach.

V-REFLEX^TM LifeStyle Glitter Heat Transfer Film/Vinyl should be properly transferred to clothing, and bonding with clothing strongly. Improperly application handling may result in heat transfer film/tape falling away from clothing during daily use or cleaning procedure, especially in industrial wash cleaning operation.

We recommend that all customers, in accordance with good manufacturing practices, establish an ongoing quality system which includes maintaining lot/roll identification throughout the garment production process. Customer should also store input materials and final products in accordance with manufacturer  ecommendations, as well as implement continuous testing throughout their production and on their finished garments that reflects their garment needs.

For lamination operations, customers should periodically check their equipment to ensure that the temperature set point matches the platen or roll temperature and that the temperature is uniform across the lamination area.