NF-HW783000-RD | RED COLOR

V-REFLEX LIFESTYLE
FLOCK HEAT TRANSFER VINYL

THE IRON-ON | HOT PRESS

Main Materials - PVC

Type: Non Reflective

Certificate - SGS SVCH, CPSIA

Color - Red, Customized Color is Available

Feature - High Fastness, Soft Hand Feeling, Flocking Effect

Cutting -  Plotter and Laser Cutting

Thickness - PET 110micron(0.11mm), Vinyl 500micron(0.50mm)

Size - 50cm*25m per Roll, Customized Size is Acceptable

Home Wash - Normal Cycles (Read Home Wash Instructions)

Dry-Cleaning - N/A

Flame Resistant - N/A

Industrial Wash - N/A

Application - T-shirt, Coats, Jackets, Sport Wear, Caps, Bags, Shoes, etc

IMPORTANT: Test each application according to appropriate care instructions required for the finished product. Actual life of V-REFLEX^TM NON Reflective Material - Flock Heat Transfer Vinyl depends on cleaning methods and wear conditions.

V-REFLEX^TM NON Reflective Material – Flock Heat Transfer Vinyl Series is produced with PVC, with soft hand feeling, Flocking effect. It is with about 110 micron of PET film as substrate, cannot be out of shape under high temperature.

V-REFLEX^TM NON Reflective Material – Flock Heat Transfer Vinyl Series only need computer, potter cutter and heat press machine, It is convenient to image without plate making, saves time and cost of plate making, saves manpower and material resources. It is suitable for big artwork, easy to cut, weed and peeling. 

V-REFLEX^TM NON Reflective Material – Flock Heat Transfer Vinyl Series can be used to make a variety of patterns and texts, and is widely used for T-shirt, coats, jackets, sport wear, caps, bags, shoes, etc. It makes your clothes more character and personality. It will help designers to expand their imagination, creativity more options to wearers. Fashion designers all around the world can not miss heat transfer film for their collections.

1. Using computer to design your patterns or texts in software

2. Cutting by plotter cutter or laser cutter machine

3. Weeding the useless parts

4. Transfer image on the T-shirt by heat press machine

5. Peeling (cold peeling)

6. Finished

NF-HW783000-RD

NF: NON Reflective Heat Transfer Film (Iron-On)

HW: Home Wash (Application, Dedication)

78:  No Meaning

30:  Flock Heat Transfer Vinyl Series

00:  NON-Stretchable

RD: Red Color

Prepare For Heat Transfer (Heat Lamination)

V-REFLEX^TM NON Reflective Material - Heat Transfer Vinyl are recommended to follow below info to set up the settings on laminating equipments.

• Lamination Temperature: 150-160 ^oC
• Dwell Time (seconds): 10-15
• Pressure : Medium
• Peeling: Cold Peeling

Above settings should be adjusted according to the pre-production testing results.

We also recommend below operations for mass production.

1. Work on a flat surface where uniform heat and pressure can be applied. Avoid applying film over seams and stitches.
2. Place V-REFLEX^TM NON Reflective Material - Heat Transfer Vinyl on substrate with the adhesive side down and apply heat and pressure as described above. Place a non-stick slip sheet between the platen and laminating surface to prevent any excess adhesive transfer contamination.
3. Allow application to cool to room temperature before removing the liner covering the front side. Place application on a flat surface and remove the liner by lifting one corner and pulling (about 45^o angle) in a continuous, smooth manner.

Additional Precautions for Heat Lamination

• 1- Do not exceed lamination temperature listed above as the PET liner may be melt and become difficult to remove. 
• 2- The lamination temperature, time and pressure listed above should be used as a guide. V-REFLEX^TM NON Reflective Material – Heat Transfer Vinyl should make the trial sample before mass production, after the trial blanching qualified mass production.
• 3- Highly recommend that wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
• 4- Fabrics with a waterproof coating on the surface cannot be printed transfered.
• 5- Wood products, ceramic products, glass products, plastic products cannot be printed transfered.

Follow below recommendation could maintain the durability to its maximum lifespan.

Recommendation:

1. Wait 24 hours before first wash.
2. Brand powdered household detergents should be used, or only use with mild detergent.
3. Wash temperature range: 15°C to 40°C
4. Do not dry clean
5. No bleach or fabric softener.
6. Actual lifetime will be dependent upon the detergent system and list dosage level.

Drying Conditions

Tumble Dry: Tumble drying should be performed in a commercially available household dryer

Air Drying: Line drying is recommended where possible.

Hang-Up Drying: on line or rack.

Should be stored in a ventilated, dry, cool warehouse, storage temperature 10~40℃, relative humidity is less than 70%.

Sharp object collision is strictly prohibited, open the package is not used up, please seal, to prevent moisture and high temperature, long-term exposure to wet climate will affect the quality.

Cut sheets should be stored flat.

The shelf life is 1 year from the factory date.